Anodising of aluminium

High durability and aesthetic value

Process description

Anodising is the process of producing an aluminium oxide coating on the surface of small parts and aluminium profiles. The anodic layer is closely connected to the surface of the element, which also can be coloured. 70% of the coating penetrates into the material and 30% grows out.

Result

The coating has a protective function against external factors, even as aggressive as acid rain or sea water. It also has high aesthetic qualities. The coating can be coloured by chemical or electrochemical method, depending on the desired colour.
To learn more about the colourisation >CLICK HERE<

Subject to the process

The properties and appearance of the oxide coating predominantly depend on the input material (type of alloy and the state of aluminium hardening – table), method of manufacturing and preperation of the product surface.

Industries

Aviation, construction, electronics / household appliances, automotive, sports and many others.

Consulting

We advise on the choice of material, so that the final result can meet the expectations of even the most demanding customers. For further advice, contact our consultant.

logotuv
Download:
Order profiles
Order small elements
E-catalogue
ORDER PLACEMENT AND RETURNS

To place an order, please complete the following documents and send them via e-mail to handlowy@anodal.pl or bring it personally to Anodal’s office. The office is open from Monday to Friday from 8 a.m. to 4 p.m. Our consultants will help in case of problems with completing the order.

Please prepare:

 

  • Technical drawings (PDF) (for sections bars – cross-sections with information about the length)
  • Service order according to the order form with the following information: aluminium grade and degree of hardening, designation of fixing (contact) points,
  • Other information that may be important, such as.: standards and codes that must be fulfilled, perimeter length for section bars, surface area calculated from the 3D development

Note! Components handed over to ANODAL must by right after manufacturing, with no preliminary treatment.

If components are to be sent by regular mail or courier:

  •  Send a copy of the order via e-mail to the address handlowy@anodal.pl
  • Attach all necessary technical drawings of the components to the e-mail
  •  Place the legible name of your company in a well-visible place on the packin

While sending back the ready products:

  • Small packages are sent back by courier service at the expense of ANODAL, otherwise the postage expenses are added to the invoice,
  • Please check the integrity and content of the package in witness of the courier, in case of damage make up a relevant report,
  • The Stock Issue Confirmation Note (WZ), along with the VAT invoice, are attached to the package and placed in the plastic pocket along with the Bill of Lading (B/L),
  • Should the invoice be sent to an address different from the destination address of the package, please provide such information in the Service Order
Would you like to get samples of colours and surface finishing?
obrazek

Please fill in the form below and we shall send you the catalogue via regular mail

Please contact our consultant

 

  • ANODAL OFFICE:
  • Open 8 a.m. – 4 p.m.
  • Ul. Matuszewska 14, Hall D2, Entrance E
  • 03-876 Warsaw

 

  • SALES, ORDERS:
  • E-mail: handlowy@anodal.pl

 

  • DETAILS – SMALL ELEMENTS:
  • Mobile: 516-060-391
  • Tel.: 22-813-08-35 ext.: 1

 

  • PROFILES:
  • Mobile: 508-312-583
  • Tel.: 22-813-08-35 ext.: 2

The Data Controller of your personal data, i.e. the entity deciding on the purposes and methods of their processing, is the company operating under the business name ANODAL SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ (detailed data in the Privacy Policy). Please be advised that providing personal data is necessary to contact you, and that you have the right to access your personal data, change it (including updating), as well as other rights described in the Privacy Policy.

PN Alloy Shiny Coloured Hard Protection Alloy composition
A1 1050A excellent excellent excellent excellent Al99.5
1200 very good very good excellent excellent Al99.0
2007 poor poor very good good Al 4.0Cu 1.2Pb 1.1Mg 0.8Mn
2011 poor poor very good good Al 5.5Cu 0.4Bi 0.4Pb
2014 poor poor very good good Al 4.5Cu 0.9Si 0.8Mn 0.5Mg
2014A poor poor very good good Al 4.5Cu 0.8Mn 0.7Si 0.5Mg
PA6 2017A poor poor very good good Al 4.0Cu 0.7Mn 0.7Mg 0.5Si
PA7 2024 poor poor very good good Al 4.4Cu 1.5Mg 0.6Mn
2030 poor poor very good good Al 3.9Cu 1.2Pb 0.9Mg 0.6Mn
3003 good very good very good very good Al 1.3Mn Cu
3004 good very good very good very good Al 1.3Mn 1.1Mg
3005 good very good very good very good Al 1.3Mn 0.4Mg
3103 good very good very good very good Al 1.2Mn
3105 good very good very good very good Al 0.6Mn 0.5Mg
PA43 5005 excellent excellent excellent excellent Al 0.8Mg
5005A excellent excellent excellent excellent Al 0.9Mg
5049 very good very good excellent excellent Al 2.1Mg 0.8Mn
5052 very good very good excellent excellent Al 2.5Mg Cr
PA13 5083 good very good excellent excellent Al 4.5Mg 0.7Mn Cr
5086 good very good excellent excellent Al 4.0Mg 0.5Mn Cr
5154A good very good excellent excellent Al 3.5Mg Mn Cr
5182 good very good excellent excellent Al 4.5Mg 0.3Mn
PA2 5251 very good very good excellent excellent Al 2.0Mg 0.3Mn
5454 very good very good excellent excellent Al 2.7Mg 0.8Mn Cr
PA11 5754 good very good excellent excellent Al 3.1Mg Mn Cr
6005A good very good very good excellent Al 0.6Mg 0.7Si Mn Cr
6016 very good excellent excellent excellent Al Si 1.0-1.5 Mg 0.25-0.6
PA38 6060 very good excellent excellent excellent Al 0.5Mg 0.5Si Fe
6061 good very good very good excellent Al 1.0Mg 0.6Si Cu Cr
PA38 6063 very good excellent excellent excellent Al 0.7Mg 0.4Si
PA4 6082 good very good very good excellent Al 0.9Mg 1.0Si 0.7 Mn
6106 good very good very good excellent Al 0.6Mg 0.4Si Mn
7010 poor poor good very good Al 6.2Zn 2.4Mg 1.8Cu Zr
PA47 7020 poor good very good very good Al 4.5Zn 1.2Mg Mn Cr Zr
PA9 7075 poor poor good very good Al 5.6Zn 2.5Mg 1.6Cu Cr